Determining multi‐pesticide residues in teas by dispersive solid‐phase extraction combined with speed‐regulated directly suspended droplet microextraction followed by gas chromatography–tandem mass spectrometry

In this study, an effective speed‐regulated directly suspended droplet microextraction method was developed to condense pesticide residues from teas through dispersive solid‐phase extraction prior to analysis by gas chromatography with tandem mass spectrometry. The extractant was intentionally dispersed into the sample solution in the form of globules through high‐speed agitation. This procedure increases the contact area between the binary phases and shortens the distribution equilibrium time. The fine globules reassembled by decelerating stirring speed, the extractant could be taken out for gas chromatography with tandem mass spectrometry. Recovery studies were performed under optimized extraction conditions by using matrix blanks fortified with pesticides at three concentrations (10, 50, and 100 µg/kg). Over 87% of the recoveries for the analytes in four tea matrices were acceptable given their recovery ranges of 70–120% and relative standard deviations of ≤20%. The limits of quantification of most pesticides were lower than 10 µg/kg and thus satisfied the requirements for maximum residue levels prescribed by the European Community. A total of 38 tea samples from local markets were analyzed by using the proposed method. Results showed that chlorpyrifos was the most frequently detected pesticide in teas. The method is a potential choice for the routine monitoring of pesticide residues in complex matrices.     

Self‐assembly of poly(ionic liquid) functionalized mesoporous magnetic microspheres for the solid‐phase extraction of preservatives from milk samples

In this work, a novel, rapid, and simple analytical method was proposed for the detection of parabens in milk sample by gas chromatography coupled with mass spectrometry. At the same time, milk sample was pretreated by magnetic solid phase extraction, which detected up to five parabens. A series of important parameters of magnetic solid phase extraction were investigated and optimized, such as pH value of loading buffer, amount of material, adsorption time, ionic strength, eluting solvents, and eluting time. Under the optimized conditions, the corresponding values were more than 0.9991, limits of detection and the limit of quantification were 0.1 and 0.5 ng/mL, respectively. In addition, the recoveries were achieved in range of 95–105%, the liner range were within 0.1–600 ng/mL, and the relative standard deviations were even lower than 5%.     

Development of a stir bar sorptive extraction method coupled to solidification of floating droplets dispersive liquid–liquid microextraction based on deep eutectic solvents for the extraction of acidic pesticides from tomato samples

A stir bar sorptive extraction method coupled with deep eutectic solvent based solidification of floating organic droplets–dispersive liquid–liquid microextraction has been used for the simultaneous derivatization and extraction of some acidic pesticides in tomato samples. In this method, initially the analytes are adsorbed on a coated stir bar from tomato juice filled in a narrow tube. After extraction, the stir bar is removed and a water–miscible deep eutectic solvent is used to elute the analytes. Afterward, a derivatization agent and a water–immiscible deep eutectic solvent (as an extraction solvent) with melting point near to room temperature are added to the obtained eluant at µL–levels and the obtained mixture is rapidly injected into deionized water. Under the optimum conditions, the introduced method indicated high enhancement (1543–3353) and enrichment (2530–2999) factors, low limits of detection (7–14 ng/L) and quantification (23–47 ng/L), good linearity (r² ≥ 0.9982), and satisfactory repeatabilities (relative standard deviation ≤12% for intra– and inter–day precisions at a concentration of 100 ng/L of each analyte). Finally, the proposed method was applied in analysis of the analytes in tomato samples.     

Determination and comparison of agarwood from different origins by comprehensive two‐dimensional gas chromatography–quadrupole time‐of‐flight mass spectrometry

Agarwood, a species of resinous heartwood, is a precious medicinal plant and a type of rare natural spice, which is widely used in medicine, cosmetics, religious activities, and other fields. In this study, agarwood samples from eight different regions across four countries were analyzed by comprehensive two‐dimensional gas chromatography?quadrupole time‐of‐flight mass spectrometry. A total of 232 species were identified (the match factors of these compounds were above 750). The main compounds of agarwood are oxygenated sesquiterpenes and chromones. The compositions of India1 and Malaysia2 were significantly different from those of other samples, which might be attributed to the different production processes of agarwood. For further investigation, factor analysis was conducted for six agarwood samples. The results showed that the data classification possessed a regional characteristic; according to the retention time and relative content, characteristic compositions were determined by factor scores. Finally, the differences of characteristic compositions were simply analyzed, and the reasons were speculated.     

Simultaneous determination of terpenes and cannabidiol in hemp (Cannabis sativa L.) by fast gas chromatography with flame ionization detection

Hemp (Cannabis sativa L.) has become widely used in several sectors due to the presence of various bioactive compounds such as terpenes and cannabidiol. In general, terpenes and cannabidiol content is determined separately, which is time consuming. Thus, a fast gas chromatography with flame ionization detection method was validated for simultaneous determination of both terpenes and cannabidiol in hemp. The method enabled a rapid detection of 29 different terpenes and cannabidiol within a total analysis time of 16 min, with satisfactory sensitivity (limit of detection = 0.03–0.27 µg/mL, limit of quantitation = 0.10–0.89 µg/mL). The inter‐ and intraday precision (RSD) was <7.82 and <3.59%, respectively. Recoveries at two spiked concentration levels (low, 3.15 µg/mL; high, 20.0 µg/mL) were determined on both apical leaves (78.55–101.52%) and inflorescences (77.52–107.10%). The reproducibility (RSD) was <5.94 and <5.51% in apical leaves and inflorescences, respectively. The proposed and validated method is highly sensitive, robust, fast, and accurate for determination of the main terpenes and cannabidiol in hemp and could be routinely used for quality control.     

薄膜基荧光传感检测的研究进展

薄膜基荧光传感器是继离子迁移谱之后,业界公认的一种最具发展潜力的微痕量物质探测技术.由于其具有灵敏性、便携性、实时检测、响应速度快、易于制造、不污染待测体系等优点,在食品检测、环境监测、质量控制和生物医学分析等领域引起了广泛的关注和研究.本文主要综述了近年来薄膜基荧光传感在挥发性气体检测、有毒化学品检测、爆炸物检测、溶液相离子检测以及生物监测等领域的研究进展,并提出了薄膜基荧光传感所面临的挑战与未来的发展方向.     

Metabolomics of lung cancer: Analytical platforms and their applications

Lung cancer is the leading type of cancer worldwide in terms of the number of new cases and is responsible for the largest number of deaths due to poor prognosis and difficult early detection. Due to its ability to detect numerous small molecular metabolites simultaneously, metabolomics has been widely used for the assessment of global metabolic changes in a living organism to discover candidate biomarkers for cancer diagnosis, investigate the development of cancer, and provide insights into the underlying pathophysiology. This review will mainly describe recent developments in lung cancer metabolomics in terms of early‐stage detection, biomarker discovery and mechanism exploration by using nuclear magnetic resonance, liquid chromatography–mass spectrometry, gas chromatography–mass spectrometry, and capillary electrophoresis–mass spectrometry in the last 10 years. The sample collection and metabolite extraction methods are also summarized.     

Effervescent tablet‐assisted demulsified dispersive liquid–liquid microextraction based on solidification of floating organic droplet for determination of methadone in water and biological samples prior to GC‐flame ionization and GC‐MS

A novel effervescent tablet‐assisted demulsified dispersive liquid–liquid microextraction based on the solidification of floating organic droplet was developed to determine methadone prior to gas chromatography with flame ionization detection and gas chromatography with mass spectrometry. In this method, a tablet composed of citric acid, sodium carbonate, and 1‐undecanol was utilized. The resulting effervescent tablet generated carbon dioxide in situ to disperse 1‐undecanol in the sample. Thus, the dispersive and extraction processes were performed in one synchronous step. An aliquot of acetonitrile as the demulsifier solvent was used for the separation of two phases instead of centrifugation. Under optimal conditions, the developed method was linear up to 50 000 µg/L with correlation coefficients higher than 0.99. Moreover, limits of detection and limits of the quantification were in the range of 3‐10  and 7‐30 µg/L in water and biological samples, respectively. Intra‐ and interday precisions (n = 6) of the spiked methadone at a concentration level of 50 µg/L were over ranges of 5.1‐6.8% and 5.7‐7.1%, respectively. The preconcentration factors and recovery values were obtained in the range of 140‐145 and 98.1 to 101.6% in real samples, respectively.     

Exploring multiple‐cumulative trapping solid‐phase microextraction for olive oil aroma profiling

Headspace solid‐phase microextraction is a solvent‐free sample preparation technique that is based on the equilibrium among a three‐phase system, i.e., sample‐headspace‐fiber. A compromise between sensitivity and extraction time is usually needed to optimize the sample throughput, especially when a large number of samples are analyzed, as usually the case in cross‐samples studies. This work explores the capability of multiple‐cumulative trapping solid‐phase microextraction on the characterization of the aroma profiling of olive oils, exploiting the automation capability of a novel headspace autosampler. It was shown that multiple‐cumulative solid‐phase microextraction has the potential to improve the overall sensitivity and burst the level of information for cross‐sample studies by using cumulative shorter extraction times.     

Application of ultrasound‐assisted liquid–liquid microextraction coupled with gas chromatography and mass spectrometry for the rapid determination of synthetic cannabinoids and metabolites in biological samples

The constant emergence of new psychoactive substances is a challenge to clinical and forensic toxicologists who need to constantly update analytical techniques to detect them. A large portion of these substances are synthetic cannabinoids. The aim of this study was to develop a rapid and simple method for the determination of synthetic cannabinoids and their metabolites in urine and blood using gas chromatography–mass spectrometry. The method involves an ultrasound‐assisted dispersive liquid–liquid microextraction that implies a rapid procedure, giving excellent extraction efficiencies with minimal use of toxic solvents. This is followed by silylation and analysis with gas chromatography–mass spectrometry. The chromatographic method allows for the separation and identification of 29 selected synthetic cannabinoids and some metabolites. The method was validated on urine and blood samples with the ability to detect and quantify all analytes with satisfactory limits of detection (from 1 to 5 ng/mL), limits of quantification (5 ng/mL), and selectivity and linearity (in the range of 5–200 ng/mL). The developed assay is highly applicable to laboratories with limited instrumental availability, due to the use of efficient and low‐cost sample preparation and instrumental equipment. The latter may contribute to enhance the detection of new psychoactive substances in clinical and forensic toxicology laboratories.